31/12/2025
By Anar on 31/12/2025, 18:24
After allmost 3 years, finally my "Spacymen" websites are back !
Now with a new AI dedicated specific area : Anar Design website.
This way my AI experiments won't polute Repper's Delight too much.
30/12/2025
By Anar on 30/12/2025, 16:51 - Generative AI
In order to keep Repper's Delight mostly focused on CFAO, I made another website for all my AI related 2D artworks.
Here is a resume of what I did so far with links.
15/05/2025
By Anar on 15/05/2025, 09:22
For our theater play that takes place in 1920 I was in charge of making an old gramophone replica.
It didn't need to actualy work, but had to be realistic enough to convince the audience.
I made it by mixing laser cutting and engraving, 3D printing, and more traditional techniques (cardboard, wood marquetry, painting).
29/03/2025
By Anar on 29/03/2025, 20:00
During the last 2 years I spent some time at customizing my small car, a Citroën AMI 100% electric.
I's a very minimalistic tiny car that can go as fast as 45 km/h with an autonomy of 70 km.
And here "minimalistic" means that there was place for a lot of improvements...
By Anar on 29/03/2025, 07:36 - Software
Back in 2019 I discovered Rocket3F and loved it right away.
It then became my favorite 3D modeler, especially for everything organic, because of its very powerful Subdivision tools.
And I loved it so much that I bought myself a Pro V1 license.
Until I changed my laptop for a new one...
28/03/2025
By Anar on 28/03/2025, 16:52 - Generative AI
I recently tested a few AI to generate 3D models from a single image.
While the results aren't perfect, I've been completely amazed on how fast they can generate acceptable results in no time ! (compared to traditional modeling techniques)
26/03/2025
By Anar on 26/03/2025, 07:02 - Weedo Tina2
Do you want to improve Z wobling issues on your beloved Tina2 ?
Then you may like this mod...
By Anar on 26/03/2025, 06:04 - Weedo Tina2
Many Tina2 users reported me big troubles and damages to their hotend cables in the long term use.
And I'm pretty sure the culprit is the way they're doing Z homing.
That's why I created this new part.
Be gentle with your Tina2 and start changing your Z homing method... before it's too late!
17/08/2023
By Anar on 17/08/2023, 15:23 - Materials
Recently I designed a few 3D printed accessories for my car.
I knew that PLA won't be a good material due to the hot temperatures that are reached inside my car during summer.
But I decided to print them using PLA anyway (because I have quiet a few rolls) just to check that my designs were correct, and to see by myself how they will react during hot summer days.
Check out the result !
21/05/2022
By Anar on 21/05/2022, 15:56
This is the making of "Caruso", a peacock that I made out of paper mache as a theater prop.
22/02/2022
By Anar on 22/02/2022, 16:02 - Print
Being involved in a theater play that takes place in 1920, we needed an old style camera.
After searching a real one without success, I decided to make our own by combining 3D printing, woodworking and painting.
Here is the result....
16/02/2022
By Anar on 16/02/2022, 15:42 - Weedo Tina2
The filament feeder on the Tina2 is working well but I find it a bit uncomfortable. It's also very simple and doesn't offer any control on the filament griping force.
I designed these feeder upgrade parts to improve the original Tina2 feeder.
15/02/2022
By Anar on 15/02/2022, 16:10 - Weedo Tina2
I had one more free unused pin on the motherboard intended for a Y max endswitch.
I decided to use it as an output pin to drive a dedicated part cooling fan.
09/02/2022
By Anar on 09/02/2022, 16:27 - Weedo Tina2
I wanted to do this mod since I got my Weedo Tina2 3D printer.
Thanks to my firmware hack it's now possible and it works !
08/02/2022
By Anar on 08/02/2022, 16:30 - Weedo Tina2
I noticed that the Weedo Tina2 3D printer has a tendency for slight Z wobbling.
So I designed a part that completely removes it which leads to much better prints.
07/02/2022
By Anar on 07/02/2022, 16:35 - Weedo Tina2
Having now a complete Marlin firmware opens a lot of new features.
Among them there is a filament runout detection section which I think is a feature every 3D printer should have.
So it's time to add one to my beloved Weedo Tina2.
03/02/2022
By Anar on 03/02/2022, 16:39 - Weedo Tina2
After a lot of trials and errors I finally succesfully hacked the Weedo Tina2 firmware.
21/01/2022
By Anar on 21/01/2022, 16:47 - Tutorials
Like any other 3D printers, it's important to spend some time at calibrating your Tina2 if you want to be sure to print accurate dimensional parts.
In this tutorial I'm gonna show you how to do this. Of course this calibrating procedure can also be used for any other 3D printer... and not just our beloved Tina2!
So if your printer doesn't give you accurate dimensional prints, go ahead and read further.
16/01/2022
By Anar on 16/01/2022, 17:12 - Weedo Tina2
In my previous post I introduced you to the Weedo Tina2 3D printer on which I allready performed a few improvements.
Among them I told you that I will probably add some light inside it. Because I'd like to be able to better see my models being printed in dark situations or at night time.
So let me show you how this can be done in this very easy to follow tutorial...
15/01/2022
By Anar on 15/01/2022, 05:28 - Weedo Tina2
After my very good first tests prints on the Weedo Tina2 3D printer, I started to see how I could improve it.
And here are my first hacks and mods.
« previous entries - page 1 of 9