Do you want to improve Z wobling issues on your beloved Tina2 ?
Then you may like this mod...
26/03/2025
Tina2 Z guides strenghteners
By Anar on 26/03/2025, 07:02
Printers › Weedo Tina2
Tina2 new Z triggering method
By Anar on 26/03/2025, 06:04
Many Tina2 users reported me big troubles and damages to their hotend cables in the long term use.
And I'm pretty sure the culprit is the way they're doing Z homing.
That's why I created this new part.
Be gentle with your Tina2 and start changing your Z homing method... before it's too late!
16/02/2022
Weedo Tina2 Feeder Upgrade
By Anar on 16/02/2022, 15:42
The filament feeder on the Tina2 is working well but I find it a bit uncomfortable. It's also very simple and doesn't offer any control on the filament griping force.
I designed these feeder upgrade parts to improve the original Tina2 feeder.
15/02/2022
Weedo Tina2 Dedicated part cooling fan
By Anar on 15/02/2022, 16:10
I had one more free unused pin on the motherboard intended for a Y max endswitch.
I decided to use it as an output pin to drive a dedicated part cooling fan.
09/02/2022
Weedo Tina2 Heated bed added
By Anar on 09/02/2022, 16:27
I wanted to do this mod since I got my Weedo Tina2 3D printer.
Thanks to my firmware hack it's now possible and it works !
08/02/2022
Weedo Tina2 Anti Z Wobbling mod
By Anar on 08/02/2022, 16:30
I noticed that the Weedo Tina2 3D printer has a tendency for slight Z wobbling.
So I designed a part that completely removes it which leads to much better prints.
07/02/2022
Weedo Tina2 filament runout detection
By Anar on 07/02/2022, 16:35
Having now a complete Marlin firmware opens a lot of new features.
Among them there is a filament runout detection section which I think is a feature every 3D printer should have.
So it's time to add one to my beloved Weedo Tina2.
03/02/2022
Weedo Tina2 firmware hacked
By Anar on 03/02/2022, 16:39
After a lot of trials and errors I finally succesfully hacked the Weedo Tina2 firmware.
16/01/2022
Let there be light !
By Anar on 16/01/2022, 17:12
In my previous post I introduced you to the Weedo Tina2 3D printer on which I allready performed a few improvements.
Among them I told you that I will probably add some light inside it. Because I'd like to be able to better see my models being printed in dark situations or at night time.
So let me show you how this can be done in this very easy to follow tutorial...
15/01/2022
Tina2 first hacks
By Anar on 15/01/2022, 05:28
After my very good first tests prints on the Weedo Tina2 3D printer, I started to see how I could improve it.
And here are my first hacks and mods.
14/01/2022
60€ 3D Printer
By Anar on 14/01/2022, 17:03
WTF !!!
Is this a joke ?
And what can we expect for that price ?
Let me introduce you to the Weedo Tina2 3D printer...