Do you want to improve Z wobling issues on your beloved Tina2 ?
Then you may like this mod...
26/03/2025
Tina2 Z guides strenghteners
By Anar on 26/03/2025, 07:02 - Weedo Tina2
Tag - Tina2
Tina2 new Z triggering method
By Anar on 26/03/2025, 06:04 - Weedo Tina2
Many Tina2 users reported me big troubles and damages to their hotend cables in the long term use.
And I'm pretty sure the culprit is the way they're doing Z homing.
That's why I created this new part.
Be gentle with your Tina2 and start changing your Z homing method... before it's too late!
16/02/2022
Weedo Tina2 Feeder Upgrade
By Anar on 16/02/2022, 15:42 - Weedo Tina2
The filament feeder on the Tina2 is working well but I find it a bit uncomfortable. It's also very simple and doesn't offer any control on the filament griping force.
I designed these feeder upgrade parts to improve the original Tina2 feeder.
09/02/2022
Weedo Tina2 Heated bed added
By Anar on 09/02/2022, 16:27 - Weedo Tina2
I wanted to do this mod since I got my Weedo Tina2 3D printer.
Thanks to my firmware hack it's now possible and it works !
08/02/2022
Weedo Tina2 Anti Z Wobbling mod
By Anar on 08/02/2022, 16:30 - Weedo Tina2
I noticed that the Weedo Tina2 3D printer has a tendency for slight Z wobbling.
So I designed a part that completely removes it which leads to much better prints.
07/02/2022
Weedo Tina2 filament runout detection
By Anar on 07/02/2022, 16:35 - Weedo Tina2
Having now a complete Marlin firmware opens a lot of new features.
Among them there is a filament runout detection section which I think is a feature every 3D printer should have.
So it's time to add one to my beloved Weedo Tina2.
03/02/2022
Weedo Tina2 firmware hacked
By Anar on 03/02/2022, 16:39 - Weedo Tina2
After a lot of trials and errors I finally succesfully hacked the Weedo Tina2 firmware.
21/01/2022
How accurate is your Tina2 ?
By Anar on 21/01/2022, 16:47 - Tutorials
Like any other 3D printers, it's important to spend some time at calibrating your Tina2 if you want to be sure to print accurate dimensional parts.
In this tutorial I'm gonna show you how to do this. Of course this calibrating procedure can also be used for any other 3D printer... and not just our beloved Tina2!
So if your printer doesn't give you accurate dimensional prints, go ahead and read further.
16/01/2022
Let there be light !
By Anar on 16/01/2022, 17:12 - Weedo Tina2
In my previous post I introduced you to the Weedo Tina2 3D printer on which I allready performed a few improvements.
Among them I told you that I will probably add some light inside it. Because I'd like to be able to better see my models being printed in dark situations or at night time.
So let me show you how this can be done in this very easy to follow tutorial...
15/01/2022
Tina2 first hacks
By Anar on 15/01/2022, 05:28 - Weedo Tina2
After my very good first tests prints on the Weedo Tina2 3D printer, I started to see how I could improve it.
And here are my first hacks and mods.
14/01/2022
60€ 3D Printer
By Anar on 14/01/2022, 17:03 - Weedo Tina2
WTF !!!
Is this a joke ?
And what can we expect for that price ?
Let me introduce you to the Weedo Tina2 3D printer...